Features
Specifications
Accessories
• Public fusion, complementary advantages of width and narrowness
It can realize the collaboration of a variety of communication modes such as broadband narrow belt, public network special network, etc., allowing multiple DMR intercom ID numbers to use it with the intercom
• Make full use of frequency point resources
Support the direct dual -slug function, the utilization of frequency resource utilization is higher
• The sound is clear and bright
After careful optimized audio design, with excellent audio encoders, to ensure that the sound is loud and the maximum extent saves the user's words. Even in a noisy environment, you can accurately identify the sponsor and hear the call content
• Powerful power, guarantee work needs
Standard for 2000mAh large -capacity lithium battery to meet long -term work needs; support 2A charging
• Compatible, meet individual needs
It is also possible to accommodate a variety of public network intercom platforms on the market to meet the needs of customerization adaptation needs
• Professional interface design
Professional battery buckle design makes the battery disassembly reliable and fast, and the touch audio/data interface provides a solid attachment connection solution
• Hard quality, no fear of harsh environment
The whole machine is in line with the IP67 protection level and is suitable for outdoor work. A number of indicators such as impact, vibration, solar radiation meet the military reliability standards, and be competent in various harsh working environments
Appearance Introduction
Product Accessories
General | |
Normal Operating Voltage |
7.5V |
Battery capacity | 2000mAh |
Battery battery life (5:5:90 working cycle, high -power launch) |
Simulation: 10hours number: 14hours |
Standby time | 36 hour |
Dimension | 129*59*33.5mm |
Weight | about 319g |
Display | 1.77 inches |
Operating Temperature |
-25℃~+60℃ |
Storage Temperature | -40℃~+85℃ |
Special Network Specification | |
Frequecy Range |
UHF:400-480MHz VHF:136-174MHz |
Channel Capacity | 3000 |
Channel interval | 12.5kHz/25KHz |
Frequency Stability | +/- 1.0ppm |
Receiver | |
Sensitivity (simulation) |
0.35uV/-116dBm(20dB SINAD) 0.22uV/-120dBm(typical) |
Sensitivity(number) |
0.3uV/-117.4dBm(BER5%) 0.7uV/-110dBm(BER 1%) |
Inter-modulation | TIA603C: 55dB;ETSI: 55dB |
Adjacent Channel Selectivity |
TIA603C: 55dB@12.5KHz; ETSI: 55dB@12.5KHz |
Common channel suppression |
12dB@12.5KHz |
Spurious Response rejection |
TIA603C: 65dB; ETSI: 65dB |
RX Spurious Radiation |
-57dBm@ (1GHz,-47dBm@)1GHz |
Hindrance | 80dB |
Rating audio power | 1W |
Audio Response | +1dB~-3dB |
Audio Distortion | ≤3% |
Public Network Specification | |
Frequency range |
• TDD-LTE Band38/39/40/41 • FDD-LTE Band1/3/5/8 • GSM 900/1800 |
Transmitter | |
Launch power | Low: 1W, high: 4W |
Frequency adjustment noise |
-40dB@12.5KHz |
Launch of bruises radiation |
-36dBm@ (1GHz, -30dBm@)1GHz |
Neighboring power | -60dB@12.5KHz |
FM Modulation Mode | 12.5KHz:11K0F3E |
4FSK Modulation Mode |
12.5KHz(data only):7K60FXD 12.5KHz(data+voice) |
Modulation Limiting | 2.5KHz@12.5KHz |
Free Timeslot Power | -57dBm |
Audio Response | +1dB ~-3dB |
Audio Distortion | ≤3% |
Digital protocol | ETSI TS 102 361-1, -2, -3 |
Digital voice compilation decoding |
AMBE+2™ |
*The above specifications are tested in accordance with applicable standards. Due to the continuous development of technology, the above index data are subject to change without notice.
Product accessories
About Us
Products
Solution
Contact Us
Telephone consultation service line
+86-(0)595-22471179
#5, Chongxiang Street, Econ.&Tech. Area, Quanzhou, Fujian, China.
WeChat:+86-13960400802
E-mail:sales@cnlisheng.com